VC-200

Features & Benefits:
Operating
Features:
·Makes straight-line cuts of any length.
·Makes bevel or chamfer cuts-Has calibrated scale for easy torch angle selection.
·Makes X .Y. V or K cuts with multiple torches for plate edge operation.
·Cuts strip with two or more torches for plate edge operating
·Dual speed and clutch controls makes the machine easy to operate from either end
Operating
Features:
·Constant speed AC induction motor located on the side opposite the cutting torch runs cooler; therefore, the drive speed is not adversely affected by temperature.
·Speed regulation is as good at low speeds as it is at high speeds due to the cone disk variable speed drive and the AC induction motor.
·Flat top mounting surface has standard bolt pattern to accommodate MIG,TIG, plasma or other welding or cutting equipment.
Design
Features:
·Integral carrying handle, light weight and balanced design allow the machine to be carried with one hand.
·A balanced design makes the machine stable when cutting, allowing a racking distance of up to 18mm from the machine with a standard torch, and no counter weight is required.
·Cone disk drive has an automatic wear adjusting mechanism which prolongs the life of the drive.

Technic Specification:
VC-200HSis modified to operate with double the Max. speed of standard VC-200, has all the convenience and portability features of the standard VC-200 machine, plus a speed range of 5″ ( 13cm ) to 120″ ( 305cm )/ Minute.The VC-200HS has a flat mounting deck.
VC-200HTis modified to withstand 300oF continuous operating temperatures that affects usually in mill and foundry applications. Same convenience,portability features and speed as that of the standard VC-200 ( Max temp 300 F ),plus the addition of a heat shield.
Circular Cutting:

The versatile VC-200 is a precision, tractor-type machine that can be used on its own track for straight line cutting and a variety of welding operations. Off track and with a radius rod assembly, the VC-200 can be used for circle cutting.